WhatsApp support For sales enquiry!

How to Configure an Approver in Odoo Studio (Vendor Bill Example)

ERP Odoo
Published in Blog on November 19, 2026 10 min read
Vendor bill with a Pay button and approval checkmark, illustrating an approver set up in Odoo Studio

Introduction

 

Many businesses need a second pair of eyes before money leaves the company. A vendor bill above a certain amount, for example, should not be paid until a responsible person has reviewed it. With Odoo Studio, you can build this control directly in the Odoo interface, without writing code. It is a practical example of Odoo Customization that fits naturally into everyday accounting work.

 

In this guide, you will learn how to complete an Odoo Approver Configuration on a button. We attach an approval step to the Pay button on a vendor bill, choose who must approve it, and limit the approval to bills whose total is greater than 1,000. We then test the result from both the requester’s and the approver’s side, so you can see the complete Odoo Approval Process in action.

 




Understanding the Terms: Approver, Approval Rule and Approval Workflow

 

These three ideas are related but different, and keeping them apart makes the configuration easier to follow:

 

- Assigning an approver means choosing who is allowed to grant approval. In the example, this is the Approvers field set to Marc Demo.

- Configuring an approval rule means deciding when approval is required. In the example, this is a condition on the approval step: Total greater than 1,000.00.

- An approval workflow is the wider process built from these pieces, such as several approval steps in a set order. This guide configures a single approval step on one button. The screen also shows an Approval Order field and an Exclusive Approval checkbox, which suggest that more complex setups are possible, but they are not configured in the screenshots and are not covered here.

 




Step-by-Step: Configuring the Approver in Odoo Studio



Step 1: Open the Vendor Bills List

 

Start from the Invoicing app. The vendor bills are listed under the Vendors menu.

 

1. Open the Invoicing app and stay on the Dashboard.

2. Click Vendors in the top menu.

3. Select Bills from the drop-down list.

4. Open the vendor bill you want to use for the configuration.

 

 



Expected result: The list of vendor bills opens. The drop-down in the screenshot also offers Refunds, Payments, Batch Payments, Products and Vendors.

 

Step 2: Open Odoo Studio from the Bill Form

 

Studio always edits the screen you are currently viewing. Opening it from a vendor bill therefore lets you customize the vendor bill form.

 

1. On the vendor bill, check that you are on the correct record. The example uses BILL/2026/10/0002 with the status Posted.

2. Click the Studio icon (the crossed tools symbol) in the top-right corner of the navigation bar.

 

 

Expected result: The Studio editor opens on the form view of the vendor bill, as shown in the next figure.

 

Step 3: Select the Pay Button

 

The approval is attached to a specific button, so the first task is to select that button inside the Studio editor.

 

1. In the Studio editor, click the Pay button at the top-left of the form.

2. Look at the left panel. It now shows the Button properties for the selected button.

 

 

The left panel shows the button’s existing settings. In this example, the Label is Pay, the Class is oe_highlight, the button is set to Call a method using the method action_register_payment, and visibility is allowed for the group Accounting / Invoicing. Leave these values unchanged. The Approvals section, with the Add an approval step link, sits near the top of the same panel.

 

Step 4: Add an Approval Step

 

In the Approvals section of the left panel, click + Add an approval step. This creates the approval that will be required when someone clicks Pay.

 

 

Expected result: A new approval step appears in the panel with its own settings, which we configure next.

 

Step 5: Choose the Approver and the Users to Notify

 

This is the core of the Odoo Approver Configuration. The new approval step offers the following fields:

 

1. Approvers: select the user who must approve. In the example, Marc Demo is selected.

2. Approver Group: an alternative way of naming approvers through a user group. It is left empty in the example.

3. Users to Notify: select the users who should be informed. In the example, Mitchell Admin is selected.

4. Description and Approval Order: the Description is empty and the Approval Order is set to 1. The Exclusive Approval checkbox is not ticked.

 

 

Expected result: The top bar shows Saved, and the Pay button now displays a small icon next to its label. This icon marks that the button has an approval step attached.

 

Step 6: Open the Condition (Filter) for the Approval

 

As configured so far, the approval would apply to every bill. To make it apply only to bills that meet a condition, use the filter icon in the Approvers row of the approval step.

 

1. Find the Approvers row in the approval step.

2. Click the filter (funnel) icon at the right of that row.

 

 

Expected result: A Domain dialog opens, where you define the condition for this approval.

 

Step 7: Create a New Rule

 

The Domain dialog first reads Match all records, which means that, with no rule, the approval applies to every record.

 

1. Click New Rule in the dialog.

 

 

Expected result: A rule line appears, where you choose a field, an operator and a value.

 

Step 8: Define the Approval Condition

 

The final configuration step is the approval rule itself. In the example, approval is required only when the bill total is greater than 1,000.

 

1. In the first part of the rule line, select the Total field.

2. Set the operator to greater than.

3. Enter the value 1,000.00.

4. Check that the dialog reads Match all of the following rules.

5. Click Confirm to save the rule. (Discard closes the dialog without saving.)

 

 

Expected result: The condition is stored on the approval step. Because the example bill totals $1,200.00, it meets the condition, and the later screenshots show the approval being requested. Close Studio when you are done so that you return to the normal bill form.

 




Practical Business Example

 

Consider a company whose accounts team registers vendor bills, while the finance manager must sign off on larger payments. Using the setup above, the accounts team can still open and post bills as usual. When someone clicks Pay on a bill above 1,000, Odoo asks for the approver’s sign-off first. Small bills are not slowed down, because the rule applies only to totals above the threshold. In the example, Mitchell Admin is the user working on the bill and Marc Demo is the approver.

 

 

 

 




Benefits of Configuring Approvers Using Odoo Studio

 

- No code required. The whole Odoo Approval Workflow step is set up through the Studio interface.

- Control at the point of action. The approval is tied to the Pay button, so the check happens exactly when a payment is about to be made.

- Targeted rules. A condition such as “Total greater than 1,000.00” keeps routine, low-value bills moving.

- Visibility. The approval status shows on the form, the request appears as an activity, and the decision is recorded in the chatter.

- Easy to adjust. The approver, the notified users and the condition can be changed later from the same Studio panel.

 

 


 

Testing and Verification

 

After configuring the approval, test it from both sides: the person who tries to pay the bill, and the person who has to approve it. The following screenshots show each stage.

 

Test 1: Try to Pay Before Approval

 

Back on the normal bill form, the Pay button now carries the approval icon. Click Pay on a bill that meets the condition.

 

 

Expected result: Odoo shows the notification An approval is missing. and does not continue to payment. In the chatter, under Planned Activities, a Grant Approval activity is assigned to Marc Demo. This confirms that the approval rule has been triggered.

 

Test 2: The Approver Finds the Request

 

The approver can find the request through the activities menu.

 

1. As the approver, click the activity (clock) icon in the top bar.

2. In the drop-down list, select the Journal Entry line, which shows one activity due today.

 



 

The activity list is then filtered to the approver’s activities that are late or due today. The bill BILL/2026/10/0002 appears with the activity Grant Approval.

 

 



 

Test 3: Grant the Approval

 

1. Open the bill BILL/2026/10/0002 from the activity list.

2. Click the approval icon next to the Pay button.

3. In the Approval pop-up, you will see the entry Awaiting approval with two buttons: a purple tick and a red cross.

4. Click the purple tick to approve.



 



 

The tick and the cross are shown, but the screenshots only demonstrate the approving action. The effect of the red cross is not shown.

 

Expected result: The pop-up now shows Marc Demo – Approved on Oct 13, 2026, with an undo arrow next to it. The chatter records a message from Marc Demo to @Mitchell Admin saying “Approved”.



 



 

Test 4: Complete the Payment

 

With the approval granted, return to the bill and click Pay again.

 

 



Expected result: Instead of the “An approval is missing.” message, the Pay dialog opens. In the example it shows the Journal Bank, the Payment Method Manual Payment, the Amount $1,200.00, the Payment Date Oct 13 and the Memo BILL/2026/10/0002, with Create Payment and Discard buttons. The approval step has done its job: payment can proceed only after the approver’s sign-off.

 

 


 

Conclusion

 

Configuring an approver in Odoo Studio takes only a few steps: open Studio on the vendor bill, select the Pay button, add an approval step, choose the approver and the user to notify, and set a condition such as Total greater than 1,000.00. The tests confirm that Odoo blocks the payment with the message “An approval is missing.”, creates a Grant Approval activity for the approver, and allows the payment once the approval is granted.

 

This is a simple but effective way to add a controlled Odoo Approval Process to your finance operations. Once you are comfortable with a single approval step, you can explore the other options on the panel, such as approver groups and approval order, to build a fuller approval workflow that suits your business.

 

 

Hi...

Got ideas? We’ve got
the skills. Let’s team up.

Have a question or ready to discuss your project? Our team is here to help you scope, design, and deliver.

Trusted by Leading Businesses
Metro Logo
SIRC Logo
Trus Holding Logo
ParkPoint Logo
Al Amthal Logo
Orient Tech Logo
🌐 +1
Select Subject?
Attach requirements or brief (optional) PDF, DOC, DOCX, PNG, JPG, ZIP (Max 10MB)
Upload
send mail graphic